Filter
Top Products
— 16 —
English
Specifications subject to change without notice.
Specifications
Modulating Frequency (200KHz STEP)............87.7, 87.9, 88.1, 88.3,
88.5, 88.7, 88.9, 89.1,
89.3, 89.5, 89.7, 89.9,
MHz
General
Operating Voltage................................................14.4 V (11 ~ 16 V)
Current consumption ..............................................................1.4 A
Operating Temperature ................................................–10 ~ 50 °C
Size (W × H × D)
Controler ........................................................50 × 145 × 24 mm
(1-15/16 × 5-11/16 × 15/16 in.)
Display unit ....................................................105 × 40 × 18 mm
(4-1/8 × 1-9/16 × 11/16 in.)
FM modulator unit..........................................150 × 30 × 80 mm
(5-7/8 × 1-3/16 × 3-1/8 in.)
Trim mount plate..............................................188 × 58 × 2 mm
(7-3/8 × 2-5/16 × 1/16 in.)
Weight
Controler ................................................................60 g (0.14 lbs)
Display unit ..........................................................125 g (0.28 lbs)
FM modulator unit..................................................600 g (1.3 lbs)
Troubleshooting guide
The following messages are displayed when certain
problems are occurring in your system. Take the
recommended actions.
01 E: No disc magazine has been loaded in the changer. The disc
magazine is not completely loaded.
Load the disc magazine properly.
02 E: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
04 E: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine
The CD/MD is quite dirty. The CD/MD is upside-down.
The CD/MD is scratched a lot.
Clean the CD/MD and load it correctly.
10 E: Nothing has been recorded on the MD.
The next MD will automatically be played.
11 E: No tracks are recorded on the MD, although it has a title.
The next MD will automatically be played.
12 E: Now reading the data in the disk.
Normal playback is resumed upon completing the reading of
the disk data.
77 E: The unit is malfunctioning for some reason.
Press the reset button on the unit. If the "77E"code does not
disappear, consult your nearest service center.
99 E: Something is wrong with the disc magazine. Or the unit is
malfunctioning for some reason.
Check the disc magazine. And then, press the reset button
on the unit. If the "99E" code does not disappear, consult
your nearest service center.
0d E: The protective circuit in the unit activates when the
temperature inside the automatic disc changer exceeds 60°C
(140°F), stopping all operation.
Cool down the unit by opening the windows or turning on
the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.
]
]
]
]
]
]
]
]
]
]
KCA-R42FM_U.S(K/En) 02.12.16 9:13 AM Page 16