Kenwood KDC-255U Car Speaker User Manual


 
10
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[AUDIO CONTROL]
/
[AUDIO CTRL]
, then press the
knob.
3 Turn the volume knob to make a selection (see the table below), then press
the knob.
Repeat step 3 until the desired item is selected or activated.
4 Press and hold to exit.
• To return to the previous hierarchy, press .
Default:
XX
SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.
BASS LEVEL
–8 to +8 (0):
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want to adjust.)
MID LEVEL
–8 to +8 (0):
TRE LEVEL
–8 to +8 (0):
EQ PRO (for
KDC
-
X397
)
BASS ADJUST BASS CTR FRQ
60/ 80/ 100/ 200: Selects the center frequency.
BASS LEVEL
–8 to +8 (0): Adjusts the level.
BASS Q FACTOR
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND
ON: Turns on the extended bass. ; OFF: Cancels.
MID ADJUST MID CTR FRQ
0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.
MID LEVEL
–8 to +8 (0): Adjusts the level.
MID Q FACTOR
0.75/ 1.00/ 1.25: Adjusts the quality factor.
TRE ADJUST TRE CTR FRQ
10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center
frequency.
TRE LEVEL
–8 to +8 (0): Adjusts the level.
PRESET EQ
NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects
a preset equalizer suitable to the music genre. (Select [USER] to use the
customized bass, middle, and treble settings.)
BASS BOOST
B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost
level. ; OFF: Cancels.
LOUDNESS LOUDNESS LV1/ LOUD LV1/ LOUDNESS LV2/ LOUD LV2: Selects your
preferred low and high frequencies boost to produce a well-balanced sound at
a low volume level. ; OFF: Cancels.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
FADER
R15 to F15 (0): Adjusts the rear and front speaker output balance.
SUBWOOFER
SET/ SUB-W SET
ON: Turns on the subwoofer output. ; OFF: Cancels.
DETAILED SET/ DETAIL SET
HPF
For
KDC
-
X397
/
KDC
-
355U
:
THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150 Hz are
sent to the speakers.
LPF SUBWOOFER/
LPF SUB-W
THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are
sent to the subwoofer.
SUB-W PHASE REVERSE/ REV (180°)/ NORMAL/ NORM (0°): Selects the phase of
the subwoofer output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than [THROUGH] is selected
for [LPF SUBWOOFER]/ [LPF SUB-W].)
SUPREME SET ON: Creates realistic sound by interpolating the high-frequency components
that are lost in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only
when playing back an MP3/WMA disc or a USB device, except iPhone/iPod.)
VOLUME OFFSET/
VOL OFFSET
(Default: 0)
–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source you
want to adjust.)
For
KDC
-
255U
/
KDC
-
155U
/
KDC
-
MP255U
/
KDC
-
MP155U
/
KMR
-
355U
:
[SUB-W LEVEL]
/
[SUB-W SET]
/
[LPF SUB-W]
/
[SUB-W PHASE]
is selectable only if
[SWITCH PRE]
is set to
[SUB-W]
. (
4
)
[SUB-W LEVEL]
/
[LPF SUB-W]
/
[SUB-W PHASE]
is selectable only if
[SUB-W SET]
is set
to
[ON]
.
EN_KDC-X397[KWK0]f.indd 10EN_KDC-X397[KWK0]f.indd 10 7/24/12 5:04:37 PM7/24/12 5:04:37 PM