Filter
Top Products
15
ENGLISH |
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
ANT CONT
P. CONT
MUTE
MARINE
REMOTE
FRONT
RL
REAR/SW
RL
REAR/SW
KDC
-
155U
KDC
-
255U
SW FRONT
RL
REAR
KDC
-
355U
KDC
-
X397
KDC
-
MP155U
KDC
-
MP255U
KMR
-
355U
Wiring connection
Part list for installation
Fuse (10 A)
Rear/subwoofer output
Rear/subwoofer output
Front output
Front output
Subwoofer output
Rear output
For
KDC
-
X397
/
KDC
-
355U
/
KMR
-
355U
:
To the optional SiriusXM Connect Vehicle Tuner (commercially available) (
➜
8)
Antenna terminal
Car fuse box
Car fuse box
Battery
Ignition switch
Blue/White
(Power control wire)
Red
(Ignition wire)
Yellow
(Battery wire)
Black (Ground wire)
To the metallic body or
chassis of the car
To the power control terminal when using the
optional power amplifier, or to the antenna control
terminal in the vehicle.
For
KMR
-
355U
:
To Kenwood Wired Marine Remote Control unit
(optional accessory)
For the latest information on marine accessories
please go to: http://www.kenwoodusa.com/
Car_Entertainment/Marine/
Brown
(Mute control wire)
Blue
(Antenna control wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
To the terminal that is grounded when either
the telephone rings or during conversation. (To
connect the Kenwood navigation system, refer your
navigation manual.)
To front speaker (left)
To rear speaker (left)
To front speaker (right)
To rear speaker (right)
Light blue/yellow
(Steering remote control
wire)
Light blue/yellow
(Marine remote control
wire)
For
KDC
-
X397
/
KDC
-
355U
/
KDC
-
MP255U
/
KDC
-
MP155U
:
To the steering wheel remote control adapter
(Not used)
If no connections are made, do not let the wire come out from the tab.
( ×4 )
( ×4 )
( ×2 )
( ×1 )
( ×1 )
( ×1 )
( ×1 )
A
Faceplate
B
Mounting sleeve
C
Trim plate
D
Wiring harness
E
Extraction key
F
Flat head screw
G
Round head screw
EN_KDC-X397[KWK0]f.indd 15EN_KDC-X397[KWK0]f.indd 15 8/7/12 2:48:16 PM8/7/12 2:48:16 PM