Filter
Top Products
English 15
Continued to next page
Operation of Hands-Free Phoning
KDC-BT648U/ KDC-X695
■
Press to enter Bluetooth mode.
■
Press to answer an incoming call.
KDC-X395/ KDC-348U
■
Press and hold to enter
Bluetooth mode.
■
Press to answer an incoming
call.
■
Press and hold for about 2 seconds to memorize the
current phone number.
■
Press briefly to recall memorized phone number.
When “CONFIRM PHONE” is displayed,
confirm connection with a cell-phone
operation.
6 The receiver is connected to a cell-phone,
with “HF CONNECT” displayed, and exits
the easy pairing mode.
■
For more details, see <Easy Pairing
function> (page 18).
■
If an error code is displayed during paring,
see <Troubleshooting> (page 34).
KDC-X395 / KDC-348U
The following 3 steps procedure is necessary.
Step 1. Pairing (Registering from Bluetooth
devices)
1 Press SRC to turn on the power.
2 Start registering this unit by operating
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit (pairing). Select “KCA-
BT300” or “KCA-BT200” from the list of
connected units.
3 Input the PIN code (“0000”) in the
Bluetooth device.
Check that registration is complete on
Getting Started
Before use the cell-phone, you need to
connect cell-phone to this unit.
■
For details on the Bluetooth cell-phone with
the hands-free function, see <About the
Cell-Phone> (page 22).
KDC-BT648U / KDC-X695
1 Press and hold to enter easy pairing
mode
“PAIRING” is displayed.
2 “SEARCHING” is displayed.
Search for the Bluetooth device.
When search is completed, “FINISHED” is
displayed.
3 Turn the volume knob to select a cell-
phone name, press to confirm.
4 Input the PIN code
■
Turn the volume knob to select the
number.
■
To move to the next digit, press ¢.
■
To delete the last digit, press 4.
5 Press the volume knob to transmit the
PIN code.
If “PAIRING OK” is displayed, registration is
completed.
Preparation : KDC-X395/ KDC-348U: Only with the optional accessory KCA-BT300 or KCA-BT200
connected.