Kenwood KDC-348U Car Stereo System User Manual


 
English 31
Mounting and wiring this product requires
skills and experience. For safety’s sake, leave
this work to professionals.
If you experience problems during
installation, consult your Kenwood dealer.
Reception may drop if there are metal
objects near the Bluetooth antenna.
Bluetooth antenna unit
For Good Reception
To assure good reception, note the following:
Communicate with the cell-phone within
the line-of-sight distance of 10 m (30
ft). The communication range becomes
shorter depending on the surrounding
environment. The communication
range also becomes shorter when there
is an obstacle between this unit and
the cell-phone. The above maximum
communication range (10 m) is not always
assured.
A broadcast station or walkie-talkie located
nearby can interfere with communication
due to too strong signal.
¤ CAUTION
Install this unit in the console of your
vehicle.
Do not touch the metal part of this unit
during and shortly after the use of the
unit. Metal part such as the heat sink and
enclosure become hot.
About Bluetooth unit (Optional:
KDC-X395/ KDC-348U)
This unit supports KCA-BT300 or KCA-BT200.
Plugging a KCA-BT300/ KCA-BT200 into this
unit will enable BT audio.
– Selecting Bluetooth Audio source
Press SRC to select the “BT AUDIO EXT”.
– To pause/resumes playback, press number
button 6 (38).
– To selects track, press 4 or ¢.
Set the Type Switch on KCA-BT300/ KCA-
BT200 as follows:
1: OFF, 2: OFF, 3: OFF
About Satellite Radio tuner
(Optional)
This unit supports Satellite Radio tuners
which are released by SIRIUS and XM.
Refer to the instruction manual of Satellite
radio tuner.
HD Radio™ Tuners that can be
connected to this unit
• KTC-HR300 • KTC-HR200 • KTC-HR100TR