Filter
Top Products
ON / OFF) ➞ Disabled System Indicator (DSI ON / OFF) ➞
Selectable Illumination (COL GRN / AMB) ➞ Contrast
Adjustment (CONT ##) ➞ Dimmer (DIM ON / OFF) ➞
Switching Graphic Display(GRAP ON / OFF) ➞ News Bulletin
Function (NEWS OFF / ##M) ➞ Local seek*
4
(LO.S OFF / ON)
➞ Selecting Tuning Mode*
4
(Auto 1 / Auto 2 / Manual) ➞ Auto
Memory Entry*
4
(A-Memory (start)) ➞ AF Function*
5
(AF ON /
OFF) ➞ Region Restrict Function*
5
(REG ON / OFF) ➞ Auto
TP Seek*
4
(ATPS ON / OFF) ➞ Monaural Reception*
5
(MONO
OFF / ON) ➞ Text Scroll*
3
(SCL Manu / Auto) ➞ Touch Sensor
Tone
• KDC-5070R
Switching Clock Display (CLK ON / OFF) ➞ Time
Adjustment*
1
<Manual> (CLK ADJ*
2
) ➞ Automatic Time
Adjustment (SYNC ON / OFF) ➞ Disabled System Indicator
(DSI ON / OFF) ➞ Selectable Illumination (COL GRN / AMB) ➞
Touch Sensor Tone (BEEP ON / OFF) ➞ News Bulletin
Function (NEWS OFF / ##M) ➞ Local seek*
4
(LO.S OFF / ON)
➞ Selecting Tuning Mode*
4
(AUTO1 / AUTO2 / MANUAL) ➞
Auto Memory Entry*
4
(A-MEMORY (start)) ➞ AF Function*
5
(AF ON / OFF) ➞ Region Restrict Function*
5
(REG ON / OFF)
➞ Auto TP Seek*
5
(ATPS ON / OFF) ➞ Monaural Reception*
5
(MONO OFF / ON) ➞ Text Scroll*
3
(SCL MANU / AUTO) ➞
Switching Clock Display
*
1
When Automatic Time Adjustment is off
*
2
Time adjustment mode entered
*
3
In FM, CD, or External disc control mode
*
4
In Tuner mode
*
5
In FM reception of Tuner mode
• Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
News Bulletin function with PTY news timeout setting, and the
Alarm function.
• The News function turns on when the setting is made for the
news interruption interval. The "##M" display indicates the
setting selected for the news interruption timeout interval.
• The "##" display indicates the setting value.
NOTE
To accommodate a greater number of functions, a menu
system has been employed for making settings. Press the
MENU button to enter the menu mode and then display the
function to make the setting. Details on each setting are
explained separately in the corresponding function page.
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the 4 button to search through the functions
backward.
Example: If you want to switch the tuning mode from auto1 to
manual, first search through the functions until you
see "Auto 1" in the display.
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The tuning mode will switch from auto 1 to auto 2.
Pressing the button again switches the setting to
manual, and "Manual" is displayed.
Ending the menu mode
Press the MENU button.
The selection includes:
• KDC-6070R
Touch Sensor Tone (Beep ON / OFF) ➞ Time Adjustment*
1
<Manual> (CLK ADJ*
2
) ➞ Automatic Time Adjustment (SYNC
4
Auto 2 Manual
3
KDC-5070RKDC-6070R
2
1
Menu System
Basic operations
— 8 —
English