Filter
Top Products
7 Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to attach a title to
•A title can't be attached to MD.
• Refer to the <Text Display Switching> (page 12) and select either
"DNPS" or "SNPS".
2 Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3 Move the cursor to the enter character position
Press the [4] or [¢] button.
4 Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character type switches as
shown below.
Character type Button
Alphabet (Upper case/ Lower case) [2] ("CAPS")
Numbers and symbols [3] ("NUM")
Special characters (Accent characters) [4] ("CHAR")
5 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
6 Repeat steps 3 through 5 and enter the name.
Station/Disc Naming (SNPS/DNPS)
— 13 —
KDC-8023_U.S 02.12.17 6:31 PM Page 13