Filter
Top Products
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display Setting
"SWPRE Rear" Rear preout.
"SWPRE N-Fad" Non-fading preout.
Switching preout <In Standby mode>
This function sets the opening and closing operation of a panel
when a disc is inserted and when it is ejected.
Display Setting
"Ejct Ang Slp" Opens and closes the panel while
maintaining the angle of the control panel
to the set angle.
"Ejct Ang Lvl" Opens and closes the panel after setting
the angle of the control panel to the
horizontal position.
Eject angle setting <In Standby mode>
Display and Setting
"Off Wait 0s"
"Off Wait 3s" (Original setting)
"Off Wait 25s"
… …
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
OFF Wait Time Setting
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display Setting
"Dimmer ON" The display dims.
"Dimmer OFF" The display doesn't dim.
Dimmer
Adjusting the display contrast.
Display and Setting
"Contrast 0"
"Contrast 5" (Original setting)
"Contrast 10"
… …
Contrast Adjustment
Selecting the button illumination color as green or red.
Display Setting
"Button Green" The illumination color is green.
"Button Red" The illumination color is red.
Selectable Illumination
Menu system
— 30 —
English
KDC-8023_U.S 02.12.17 6:32 PM Page 30