Kenwood KDCBT7043U Car Stereo System User Manual


 
Next page 3
*Factory setting
* Function of KDC-BT7043U.
* iPod play mode cannot be set when <iPodCTRL> is set to
“OFF”.
* Refer to <Menu Glossary> (page 31).
Category Item Setting Entry Setting overview Condition Page
MENU “NR LEVEL”
* “–2” – “0”*
– “+2”
Reduces the noises generated by the surrounding
environment without changing the microphone
volume.
*
“SP SEL”
* “FRONT”*/
“F-R”/ “F-L”
Specify the voice output speaker.
*
“CALL BEEP”
* “ON”*/ “OFF”
Output a beep from the speaker when a call comes in.
*
“BT F/W UPDATE”
*
1 sec.
Display the firmware version and update the firmware.
25
“BEEP”
* “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/
OFF.
“CLOCK ADJUST”
1 sec.
Sets the clock.
—18
“DISPLAY” “OFF”/ “ON”*
Turns off the display when no operation is performed.
*
“DIMMER” “OFF”/
“AUTO”*
Dims the display part in conjunction with the light
switch of the vehicle.
“IL EFFECT” “OFF”/ “ON”*
Sets whether the key illumination brightness is changed
in conjunction with the key operation.
“DOT LINE” “OFF”/ “ON”*
Specifies whether to display the red dotted line on the
display.
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
*
“ZONE2” “REAR”*/
“FRONT”
Specifies the destination of AUX input sound when the
Dual Zone function is turned on.
*
“SUPREME” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
*
“CRSC” “OFF”/ “ON”*
Switches to Monaural to decrease noise when reception
is poor.
8
“NAME SET”
1 sec.
Sets the display when switched to AUX source.
9
“SCROLL” “AUTO”*/
“MANUAL”
Specifies whether the text is scrolled automatically.
—4
“FAV DELETE”
1 sec.
Deletes Favorite Preset Memory.
21
“AUX” “OFF”/
“ON1”*/
“ON2”
Sets whether to display AUX during source selection.
*
“CD READ” “1”*/ “2”
Sets the CD read mode.
*
“AUDIO PRESET”
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
20
“DEMO MODE” “OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—18
English
|
7