Filter
Top Products
8
|
KDC-BT7539U
1 Enter Function Control mode
Press the [FNC] button.
Function icon is displayed.
2 Select your desired setup item
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the [FNC] button or “
” icon.
Repeat selection and determination until your
desired setup item is selected.
Example:
MENU
DISP
DISP
MENU
TEXT
TYPE
3 Make a setting
Turn the Control knob to select a setting value,
and then press the Control knob.
• The value of items with mark can be set by
pushing the Control knob towards right or left.
• Some items require you to keep pressing the
Control knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the Control
knob is displayed in the Entry column in seconds.
• For the functions accompanied by the
description of the setting procedure and so forth,
the reference page numbers are displayed.
4 Exit Function Control mode
Press the [FNC] button for at least 1 second.
Display Settings
Function Control
About Display Type
Shown below are examples of display types.
Display Display Type Chinese display
“TYPE [A]”
1
1
1
3
1
1
3
“TYPE [B]”
1
1
1
1
1
“TYPE [C]”
1
1
2
3
1
2
3
“TYPE [D]”
1
1
2
1
2
“TYPE [E]”
44
“TYPE [F]”
6
1
6
1
“TYPE [G]”
55
• To select the Chinese display type, select “ON” in “MENU”
> “Chinese” of <Function Control> (page 6).
⁄
• 1 Text display part
2 Status display
3 Icon display part
4 Spectrum Analyzer display
5 Clock display
6 Display (varied depending on the source)