Filter
Top Products
26
|
KDC-BT838U
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1 Enter voice tag mode
Select “BT” > “VOICE” > “NAME”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Search for the name to register
Select the name to register with reference to 4 in
<Calling a number in the PhoneBook> (page 15).
If a voice tag has already been registered for a
name, “*” is displayed before the name.
3 Select a mode
Push the Control knob towards right or left.
Display Operation
“N-REG” Register a voice tag.
“N-CHK”* Play a voice tag.
“N-DEL”* Delete a voice tag.
“
” Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “REG” (Regist)
4 Register a voice tag (first)
Press the Control knob.
“Enter Voice 1” is displayed.
When a beep is heard, utter a voice tag within 2
seconds.
5 Confirm the voice tag (second)
Press the Control knob.
“Enter Voice 2” is displayed.
When a beep is heard, utter the same voice tag as
that you uttered in step 4 within 2 seconds.
“Completed” is displayed.
6 End registration
Press the Control knob.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the Control knob allows you to retry
voice input. (page 40)
Select “CHK” (Play)
4 Press the Control knob.
Play the registered voice and return to step 2.
Select “DEL” (Delete)
4 Delete a voice tag
Press the Control knob.
Turn the Control knob to select “YES”, and then
press the Control knob.
Return to step 2.
Exit the voice tag mode
Press the [FNC] button.
⁄
• Audio sound is not output during voice tag registration.
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1 Enter voice tag mode
Select “BT” > “VOICE” > “TYPE”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the category (type) you wish to set
Turn the Control knob or push it towards up or
down.
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”
3 Press the Control knob.
4 Select a mode
Push the Control knob towards right or left.
Display Operation
“T-REG” Register a voice tag.
“T-CHK”* Play a voice tag.
“T-DEL”* Delete a voice tag.
“
” Return to step 2.
* Displayed only when a category (type) for which a voice
tag has been registered is selected.
5 Register the category (type) by performing
steps 4 to 6 in <Adding a voice dialing
command> (page 26).
Exit the voice tag mode
Press the [FNC] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phonebook
may not be recalled by voice command.
Bluetooth Setup