Kenwood KDC-BT838U Car Stereo System User Manual


 
6
|
KDC-BT838U
Category Item Setting Entry Setting overview Condition Page
MENU “Security Set”/
“Security Clear”
1 sec.
Sets/Resets security code.
18
“SRC Select” “1”*/ “2”
Sets the source selection method.
33
“iPod Mode” “OFF”/ “ON”*
When set to “ON”, allows you to select music in the manner
similar to that of the iPod.
12
“Device Regist”
1 sec.
Register a Bluetooth device (pairing).
23
“SPCL DVC
Select”
1 sec.
Allow registration of a special device that cannot be
registered normally.
23
“Phone
Selection”
1 sec.
Select a cell-phone subject to hands-free connection.
25
“Audio Selection”
1 sec.
Select the Bluetooth audio player to be connected.
—25
“Device Delete”
1 sec.
Cancel registration of the Bluetooth device.
25
“BT DVC Status” 1 sec.
Display the status of the Bluetooth device.
—33
“PIN Code Edit”
1 sec.
Specify the PIN code required when registering this unit
using the Bluetooth device.
24
“Auto Answer” ”OFF”/ ”0s” – ”8s”*
– “99s”
Answer a call automatically after lapse of the preset time
interval for automatic answer.
33
“SP Select” ”Front”*/ ”F-R”/
”F-L”
Specify the voice output speaker.
33
“Call Beep” ”ON”*/ ”OFF”
Output a beep from the speaker when a call comes in.
33
“BT F/W Update”
1 sec.
Display the firmware version and update the firmware.
25
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
“Clock Adjust” 1 sec.
Sets the clock.
19
“Date Adjust” 1 sec.
Sets the date.
19
“Date Mode” 7 types 1 sec.
Sets the date display mode.
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed.
—33
“Dimmer” “OFF”/ “ON”*
Dims the display part in conjunction with the light switch
of the vehicle.
“ILM Dimmer” “AUTO”*/ “MNAL1”/
“MNAL2”/ “OFF”
Sets whether the key illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
34
“ILM Effect” “OFF”/ “ON”*
Sets whether the key illumination brightness is changed in
conjunction with the key operation.
“ILM MSC SYNC” “OFF”*/ “ON”
Sets whether the key illumination brightness is changed in
conjunction with the sound volume.
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
34
“Zone2” “Rear”*/ “Front”
Specifies the destination of AUX input sound when the Dual
Zone function is turned on.
34
“Supreme” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
34
“CRSC” “OFF”/ “ON”*
Switches to Monaural to decrease noise when reception is
poor.
“Receive Mode” “Auto”*/ “Digital”/
“Analog”
1 sec.
Sets the receive mode of HD Radio.
34
“ESN=”
Displays the Electronic Serial Number of satellite radio.
“Name Set” 1 sec.
Sets the station name (SNPS)/ disc name (DNPS)/ AUX name.
9
“Scroll” “Auto”*/ “Manual”
Specifies whether the text is scrolled automatically.
“Built in AUX” “OFF”*/ “ON”
Sets whether to display AUX during source selection.
“CD Read” “1”*/ “2”
Sets the CD read mode.
34
“Audio Preset”
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
22
Function Control
Functions in the table below can be set up by using Function Control.