Filter
Top Products
English
|
9
Function of MP3/WMA
Folder Search
Selecting the folder you want to listen to.
1 Enter Folder Search mode
Press the [38] button.
•
File No. display changes to Folder No. display during the
Folder Search mode.
• Message “FOLDER SEARCH MODE” is shown during Track
title display.
2 Select the folder
Press the [DISC+]/[FM] or [DISC–]/[AM] button.
With the [DISC–]/[AM] button you move to the
previous folder, and with the [DISC+]/[FM] button to
the next folder.
3 Decide the folder to play
Press the [38] button.
The Folder Search mode releases, and the MP3/
WMA in the folder being displayed is played.
• See 'Notes on playing MP3/WMA' (page 4) for details of
the search action in the Folder search mode.
• You cannot use the folder search function on a control
unit that cannot perform remote control operation.
Track/File/Disc/Folder Repeat
Replaying the song, disc in the Disc changer or MP3/
WMA folder you’re listening to.
Press the [REP] button.
Each time the button is pressed the Repeat Play
switches as shown below.
In CD source
Repeat play
Track Repeat
Disc Repeat
OFF
In MP3/WMA source
Repeat play
File Repeat
Folder Repeat
OFF
•
Folder Repeat only is enabled in MP3/WMA, but Disc
Repeat is disabled.
Function of VCD
Audio output select
You can switch the audio output to STEREO, Left or
Right.
Press the [SCAN]/[SCN] button.
Setting
The stereo sound is output.
Outputs the Left channel sound to the right and left speakers.
Outputs the Right channel sound to the right and left speakers.
• If a disc containing the mixed Video CD and CD-DA
signals is played, the Audio output select function is
cancelled when the CD-DA part is played back.
Random Play
Play all the songs on the disc or MP3/WMA folder in
random order.
For the operation method refer to Instruction
Manual of Control unit.
• Random selection within a folder is enabled in MP3/
WMA, but random selection in the entire disk is disabled.
• Magazine Random Play is disabled in this unit.
Disc Naming (DNPS)
For the operation method refer to Instruction
Manual of Control unit.
• The disc name preset function can register names of
up to 100 discs using up to 12 characters for each disc
name.
The availability of this function as well as the number
of discs which can be registered using this function
and the number of usable characters may be variable
depending on the control unit in use.
• In this unit, up to 100 DNPSs and CDs in total can be
registered into a disc that contains MP3/WMA.