Filter
Top Products
32 English
Wiring connection
ANT. CONT
MUTE
P.CONT
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
–
+
L
R
LR
Battery
Car fuse box
(Main fuse)
Black (Ground wire)
Yellow (Battery wire)
Red (Ignition wire)
Blue
(Antenna control wire)
Light Blue/Yellow
(Steering remote control
wire )
Brown
(Mute control wire)
Blue/White
(Power control wire)
To the metallic body or chassis of the car
Car fuse box
ACC
Ignition key switch
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or
to the power terminal for the booster amplifier of the
film-type or short pole type antenna.
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
matches your car is required.
To connect the Kenwood navigation system, consult
your navigation manual.
(Connect to the terminal that is grounded when
either the telephone rings or during conversation.
KDC-U4549SD/ KDC-U4549 only)
When using the optional power amplifier, connect to
its power control terminal.
To front left speaker
Antenna Cord
FM/AM antenna
input (JASO)
USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) cable
which is stereo type and does not have
any resistance.
To Kenwood disc changer/ External
optional accessory (KDC-U4549SD/
KDC-U4549 only)
(To connect these leads, refer to the
relevant instruction manuals.)
Rear output
Rear output/ Sub Woofer
output switchable
(page 9)
Front output
Front output
KDC-U549BT
KDC-U4549SD/ KDC-U4549
Sub Woofer output
To front right speaker
To rear left speaker
To rear right speaker
If no connections are made, do not let the wire come out from the tab.
White
Wiring harness D
Fuse (10A)
Green
Gray
Purple
White/Black
Green/Black
Gray/Black
Purple/Black