Kenwood KDC-U4549SD Car Stereo System User Manual


 
26 English
SMS (Short Message Service)
Preparation : KDC-U4549SD/ KDC-U4549: Only with the optional accessory KCA-BT300 or KCA-
BT200 connected.
KDC-U549BT
Press to enter Bluetooth mode.
KDC-U4549SD/ KDC-U4549
Press and hold to enter Bluetooth mode.
About the Cell-Phone
Version: Bluetooth Standard Ver. 2.0
Profile:
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone book Access Profile)
SYNC (Synchronization Profile)
For the cell-phones verified for compatibility,
access the following URL:
www.kenwood.com/cs/ce/bt/
The units supporting the Bluetooth
function have been certified for
conformity with the Bluetooth Standard
following the procedure prescribed
by Bluetooth SIG. However, it may be
impossible for such units to communicate
with your cell-phone depending on its
type.
Item Selectable setting (Preset: *)
RECONNECT KDC-U549BT only
ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,
even after it is disconnected. ; OFF: Cancels.
When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by
selecting [PHONE SELECT].
BT HF /
BT HF/AUDIO
FRONT *: Outputs audio from the front-left and front-right speakers. ; ALL: Outputs audio from the all
speakers.
CALL BEEP ON *: You can output a beep from the speaker when a call comes in. ; OFF: Cancels.
BT F/W UPDATE Display the firmware version and update the firmware.
MIC GAIN –3 — 0 * — +3: Adjust the sensitivity of the built-in microphone for a telephone call. Adjust the voice of
caller. Setting to “+” increases the voice volume.
NR LEVEL –3 — 0 * — +3: Reduce the noises generated by surrounding environment without changing the
built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to “+” increases the noise
reduction.
EC LEVEL –2 — 0 * — +2: Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction.
[MIC GAIN], [NR LEVEL], [EC LEVEL] is selectable only for KDC-U549BT and KDC-U4549SD/KDC-U4549 with KCA-BT300.