Filter
Top Products
English 25
■
The SMS that has arrived when the cell-
phone is not linked with Bluetooth cannot
be displayed. You need to download it.
■
The short message cannot be displayed
during downloading.
■
Unread messages are prefixed with an
asterisk (*).
Return message setting
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select [SMS],
then press to enter.
4 Turn the volume knob to select [SMS
MESSAGE], then press to enter.
5 Turn the volume knob to select a
message, then press to confirm.
■
When the [USER] is selected, a message
is displayed. Press the volume knob again.
6 Hold to finish the procedure.
Creating an original message
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select [SMS],
then press to enter.
4 Turn the volume knob to select [SMS
MESSAGE], then press to enter.
5 Turn the volume knob to select [USER],
then press and hold to enter.
6 Turn the volume knob to select the
character.
■
To move to the column, press 4 / ¢ .
■
To select the character type, press DISP.
■
To delete the character, press .
■
To delete the all characters, press and
hold .
■
You can enter alphanumeric characters
using the ten keys on the remote
controller.
7 Press the volume knob to confirm.
8 Hold to finish the procedure.
SMS Setup
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select [SMS],
then press to enter.
4 Turn the volume knob to make a
selection, then press to confirm.
See table below for selection.
5 Hold to finish the procedure.
■
To cancel the Bluetooth mode, press .
Item Selectable setting (Preset:*)
SMS
SMS
DOWNLOAD
Download a short message. (For details, see page 24.)
SMS REPLY AUTO * : Replies to the received SMS automatically. ; MANUAL : Sets whether to reply to the received SMS. ;
OFF : Does not reply to the received SMS.
SMS MESSAGE You can select a return message.
■
[SMS REPLY]:
– When “AUTO” is selected, a reply is made only to the SMS from the phone whose phone number has been registered in the
Phone Book. If an SMS is received from the phone whose phone number has not been registered in the Phone Book, you can reply
to it in the same manner as you selected “MANUAL”.
– When an SMS is received with “MANUAL” selected, “REPLY Y/ N” is displayed. Selecting “Y” sends the reply. Selecting “N” cancels
the reply. Selecting “Y” allows you to select a message.
– If sending of a reply message fails, “SEND ERROR” is displayed. While “RESEND Y/ N” is still displayed on the display, selecting “Y”
resends the reply. Selecting “N” cancels the reply.
B64-4935-00_01_K.indb 25 11/12/21 9:39