Filter
Top Products
— 20 —
The following messages are displayed when certain problems are occurring in your system. Take the recommended
actions.
01 E: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Load the disc magazine properly.
02 E: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
04 E: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
Clean the CD and load it correctly.
77 E: The unit is malfunctioning for some reason.
Press the reset button on the unit. If the "77E" code does not disappear, consult your nearest service center.
99 E: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
Check the disc magazine. And then, press the reset button on the unit.
If the "99E" code does not disappear, consult your nearest service center.
0d E: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all
operation.
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will
start playing again.
]
]
]
]
]
]
]
Troubleshooting guide
English
KDC-C517/467FM(K)/U.S_r2 02.12.16 10:05 AM Page 20