Kenwood KDC-MP428 Car Stereo System User Manual


 
36
|
English
Specifications
Specifications subject to change without notice.
FM tuner section
Frequency range (200 kHz space)
: 87.9 MHz – 107.9 MHz
Usable sensitivity (S/N = 30dB)
: 9.3dBf (0.8 µV /75 Ω)
Quieting Sensitivity (S/N = 50dB)
: 15.2dBf (1.6 µV /75 Ω)
Frequency response (±3.0 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 70 dB
Selectivity (±400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 40 dB
AM tuner section
Frequency range (10 kHz space)
: 530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB)
: 28 dBµ (25 µV)
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 1 Bit
Spindle speed
KDC-MP4028/KDC-MP428:
1000 – 400 rpm (CLV 2times)
KDC-3028/KDC-328:
500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response (±1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.01 %
Signal to Noise ratio (1 kHz)
KDC-MP4028/KDC-MP428: 105 dB
KDC-3028/KDC-328: 93 dB
Dynamic range
: 93 dB
Channel separation
KDC-MP4028/KDC-MP428: 96 dB
KDC-3028/KDC-328: 85 dB
MP3 decode (KDC-MP4028/KDC-MP428)
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode (KDC-MP4028/KDC-MP428)
: Compliant with Windows Media Audio
AAC decode (KDC-MP4028/KDC-MP428)
: AAC-LC ".m4a" files
Audio section
Maximum output power
: 50 W x 4
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Tone action
Bass : 100 Hz ±10 dB
Middle : 1 kHz ±10 dB
Treble : 10 kHz ±10 dB
Preout level / Load (during disc play)
KDC-MP4028:
4000 mV/10 kΩ
KDC-MP428/KDC-3028/KDC-328
: 2000 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
Auxiliary input (KDC-MP428)
Frequency response (±1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 100 kΩ
General
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 155 mm
7-3/16 x 2-1/16 x 6-1/10 inch
Weight
: 2.64 lbs (1.20 kg)