Filter
Top Products
English
|
9
System Q
You can recall the best sound setting preset for
different types of music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
When the button is pressed once, the current
sound setting is displayed.
Each time the button is pressed, the sound
setting switches.
Sound setting Display
Natural "NATURAL"
User memory
* "USER"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP40"
Jazz "JAZZ"
• *
User memory: The values set on the <Audio
Control> (page 9).
KDC-3028/KDC-328 doesn't have the User memory
function so the values of Bass, Middle, and Treble set
in audio control are replaced to the System Q values
and "USER" is not be displayed when the System Q
setting is changed.
• Each setting value is changed with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.
Audio Control
1 Select the source for adjustment
Press the [SRC] button.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4 Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item Display Range
Subwoofer level*
1
*
2
*
3
"SW L" –15 — +15
Bass level "BAS L" –8 — +8
Middle level "MID L" –8 — +8
Treble level "TRE L" –8 — +8
Balance "BAL" Left 15 — Right 15
Fader "FAD" Rear 15 — Front 15
• *
1
You can control this item when <Switching preout>
(page 22) is set to "SWPRE SW". (KDC-MP428 only)
• *
2
You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
• *
3
Function of the KDC-MP4028/KDC-MP428
5 Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[ATT] button.