Kenwood KRC-535 Car Stereo System User Manual


 
Press the [MTL] button.
Each time the button is pressed the Tape type switches as
shown below.
Tape type Display
CrO
2
(Type II), FeCr (Type III), Metal (Type IV) "Metal ON"
Normal (Type I) "Metal OFF"
Selecting the Tape type
Press the [B NR] button.
Each time the button is pressed the Dolby B NR turns ON or
OFF.
When it's ON, "B-NR ON" is displayed.
Dolby B NR
Press the [AM] button.
When it's stopped press the [PROG] button.
Fast Forwarding
Press the [FM] button.
When it's stopped press the [PROG] button.
Rewinding
Fast Forwarding and Rewinding
When there's no Cassette Tape inserted
1 Slide open the faceplate
Press the [0] button.
2 Insert a Cassette Tape.
When the faceplate has been slid open, it might interfere with the
shift lever or something else. If this happens, pay attention to safety
and move the shift lever or take an appropriate action, then operate
the unit.
• The sound will be temporarily muted while the faceplate is
moving.
• When there's a Cassette Tape inserted, the "IN" indicator is ON.
When there's a Cassette Tape inserted
Press the [SRC] button.
Select the "TAPE" display.
When you want to listen to the reverse side
Press the [PROG] button.
Eject the Cassette Tape
1 Eject the Cassette Tape
Press the [0] button.
2 Close the faceplate
Press the [0] button.
Playing Cassette Tapes
— 13 —
KRC-535_U.S 01.10.26 5:38 PM Page 13