Filter
Top Products
Setup Menu
Displaying the AV I/F 1 screen
AV I/F 1 screen
AV Int
e
rf
ace
1
Adjusts the volume.
2
Returns to the Control screen of the previous
source.
3
Calls the Sound Effects Menu. (see page 86)
4
Calls the Setup Menu.
5
Selects a navigation system connection. ( RGB)
"RGB" Allows the Kenwood’s Navigation System
to connect via its interface cable.
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
"OFF" Must be used if no navigation system is
connected. (The navigation display is
cancelled when the AV source is
switched.)
6
Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
( VIDEO1)
If you have set the navigation system connection to
"AV IN1", the display is fixed to "NAV".
7
Sets an image display of the system that is
connected via the AV INPUT2 port. ( Normal)
"Normal" When the image source is switched,
an image entered via the AV INPUT2
port is displayed.
"AUTO": When an image signal is entered via
the AV INPUT2 port, this image is
displayed.
"R-ViewCAM": An image entered via the AV INPUT2
port is displayed when the shift lever
of the car is placed in the Reverse
position.
8
Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. ( VIDEO2)
If you have selected the "R-ViewCAM" display for
the AV INPUT2 port, the "R-ViewCAM" is always
selected.
9
Displays the AV I/F 2 screen.
If is not shown, touch
or to display it.
N
e
x
t
Pr
e
v
.
AV Int
e
rf
ace
Normal
No
N
rma
mal
ma
N
1
1
1
1
4
7
8
7
8
9
5
5
6
6
3
2
72 English
AV Interface
You can set audio and visual (AV) interface parameters.