Filter
Top Products
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
iPod
AUDIO IN
iPod
VIDEO IN
iPod
VIDEO OUT
iPod
AUDIO OUT
12
|
Quick Start Guide
Connecting Wires to Terminals
⁄
See <Connecting the ISO Connector> (page 11).
Ignition wire (Red)
Battery wire (Yellow)
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A-4 Yellow Battery
A-5 Blue/White Power Control
A-6 Orange/White Dimmer
A-7 Red Ignition (ACC)
A-8 Black Earth (Ground)
Connection
Speaker
Connector
B-1 Purple Rear Right (+)
B-2 Purple/Black Rear Right (–)
B-3 Gray Front Right (+)
B-4 Gray/Black Front Right (–)
B-5 White Front Left (+)
B-6 White/Black Front Left (–)
B-7 Green Rear Left (+)
B-8 Green/Black Rear Left (–)
⁄
• Speaker Impedance
: 4 – 8 Ω
• USB terminal Maximum
Supply current
: 500 mA
⁄
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic
part of the vehicle.
For the sake of safety, be sure to connect the parking sensor.
⁄
Connect to the vehicle’s parking brake detection switch harness.
Parking sensor wire (Light Green)
Parking sensor wire Junction cable
(Light Green) (Accessory 3)
USB connector (1m)
iPod cable
(Accessory 4)
iPod
(commercially
available)
USB device (commercially available)