Filter
Top Products
English
|
9
Menu Operation
Menu System
Set up the following functions;
Display Setting Setting overview
Source
“SECURITY SET”/
“SECURITY CLR”
Refer to
page 10
Sets/Resets security code.
“CLOCK ADJUST” Refer to
page 10
Sets the clock.
“DISPLAY” ON*/OFF Turns off the display when no
operation is performed.
—
“DIMMER” ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
—
“DOT LINE” ON*/OFF Specifies whether to display
the red dotted line on the
display.
“SWPRE” REAR*/
SUB-W
Sets the preout output.
“SUPREME” ON*/OFF Turns ON/OFF the Supreme
function.
“CRSC” OFF/ON* Switches to Monaural to
decrease noise when reception
is poor.
“NAME SET” Refer to
page 11
Sets the display when switched
to AUX source.
“SCROLL” AUTO*/
MANUAL
Specifies whether the text is
scrolled automatically.
—
“RECEIVE MODE” Refer to
page 11
Sets the receive mode of
HR radio.
“ESN” — Displays the Electronic Serial
Number of satellite radio.
“AUX” OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
“CD READ” 1*/2 Sets the CD read mode.
“DEMO MODE” Refer to
page 11
Specifies whether to enable
demonstration.
—
*Factory setting
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in standby state.
: Can be set while Audio file source of CD.
: Can be set during FM reception.
: Can be set during Satellite radio source.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
— : Can be set during all sources.
1 Enter Menu mode
Press the [M.JOG] button for at least 1 second.
“MENU” is displayed.
2 Select the menu item
Push the Control knob towards up or down.
3 Set the menu item
Push the Control knob towards right or left.
4 Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Refer to the <Appendix> (page 13) for the details of the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.