Filter
Top Products
English
|
57
Audio Set Up (Function of KVT-727DVD)
Crossover Network Setup
You can manually set a crossover frequency of
speakers.
Sets a High pass Filter friquency.
X'Over HPF
(Page 52 p)
X'Over(HPF)
Return
HPF Front HPF Rear
FREQ
Slope
80Hz
18db
FREQ
Slope
30Hz
18db
2
3
2
1
1
2
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
Sets a Low pass Filter friquency.
X'Over LPF
(Page 52 p)
X'Over(LPF)
Return
FREQ
Slope
80Hz
18db
Normal
SUB Phase
2
3
4
1
1
2
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
4 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set to
"Reverse".
• When you select a speaker type on the Speaker Setup
screen, the crossover frequency setup is cleared.
• During crossover setup, the speaker type is set to "User"
on the Speaker Set Up screen.
1