Kenwood KVT-627DVD Car Video System User Manual


 
English
|
95
Troubleshooting Guide
Some system functions are limited to control depending on your setup.
• Zone cannot be set.
• The "Rear Bass Boost" of Surround Control Adjust cannot be set.
• The rear speakers of DTA cannot be set.
• The "Position Fine Control" of rear speakers cannot be set.
• The "Channel Level" of rear speakers cannot be set.
• The SRS CS
II cannot be set.
The rear speakers have been set to
"NONE" on the Speaker Set Up screen
(page 54).
• No Surround Control (Sound Field) can be set.
• No signals can be set.
• The "Parametric Equalizer" cannot be set.
• The "Position (Position Fine Control)" cannot be set.
• The "Car Type Setup" value cannot be set.
• The "Speaker Setup" value cannot be set.
• No crossover frequency can be set.
• The "Channel Level" (test signal output) cannot be set.
The Zone Control has been turned On
(page 92).
• The Surround Control (Sound Field) cannot be set to
"Bypass+Center".
• The "Center Level" of Surround Control Adjust cannot be set.
• The "Center Width Control" of Surround Control Adjust cannot
be set.
• The center speaker for DTA cannot be set.
• The "Position Fine Control" of the center speaker cannot be set.
• The "Channel Level" of the center speaker cannot be set.
The center speaker has been set to
"NONE" on the Speaker Set Up screen
(page 54).
• The Surround Control Adjust cannot be set.
The Surround Control (Sound Field)
(page 82) has been set to "Bypass" or
"Bypass+Center".
• The Surround Control (Sound Field) cannot be set to "Dolby
PLII".
The center and rear speakers have been
set to "NONE" on the Speaker Set Up
screen (page 54).
• The subwoofer of DTA cannot be set.
• The "Position Fine Control" of the subwoofer cannot be set.
• The "Channel Level" of the subwoofer cannot be set.
The subwoofer has been set to "NONE"
on the Speaker Set Up screen (page 54).
• No sound effectors of SRS WOW.
The Surround Control (Sound Field)
(page 82) has been set to "Dolby PL
II".