Filter
Top Products
8
|
English
Installation for Monitor Unit
Installation for Receiver unit
Accessory 6
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Metal mounting strap
(commercially available)
Self-tapping screw
(commercially available)
Screw (M4X8)
(commercially available)
Firewall or metal support
Make sure that the unit is installed securely in place. If the unit is unstable,
it may malfunction (eg, the sound may skip).
1. Attach the installation brackets 0 to the sides of the
hideaway unit using the sems bolts 8.
2. Use the tapping screw 9 to secure the hideaway unit
to the audio board.
Installation brackets
(Accessory 0)
Sems bolts (M4 × 8 mm)
(Accessory 8)
Tapping screw (ø4 × 16 mm)
(Accessory 9)