Filter
Top Products
— 57 —
This function permits switching of the spectrum analyzer
display.
Display and setting:
Select the display "Icon/Speana Select" during the selecting
function in the menu system.
Pressing the 4 or ¢ button switches the Icon/Spectrum
analyzer.
You cannot operate when the display mode is set to “Display Type
B”.
NOTE
2
1
Icon/Spectrum analyzer Select
You can dim the display.
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
NOTE
Dimmer
You can change the font used on the display.
Display and setting:
Select the display "Font Select" during the selecting function in
the menu system.
Pressing the 4 or ¢ button switches the font on the
display.
2
1
Font Select
This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Display and setting:
"Loudness ON" : The loudness function is on. (Default setting)
"Loudness OFF" : The loudnesss function is off.
Loudness
<When the 5.1 ch surround processor unit is not connected>