Filter
Top Products
10
BYPASS jack
Connect this jack to your effect pedal or amp, etc.
When the tuner is on, the sound from the
instrument connected to the INPUT A or INPUT
B jack will be muted. When the tuner is off, the
sound from the instrument connected to the
input jack will be audible. Since this is “true
bypass,” the output sound is unaffected by the
internal circuit. If instruments are connected to
both INPUT A and INPUT B jacks, use the
INPUT SELECT switch to choose the instrument
that will be audible from the BYPASS jack. The
INPUT SELECT indicator shows the input jack
that is selected. If an instrument is connected
only to the INPUT A or INPUT B jack (not both),
the sound of the connected instrument will
always be audible from the BYPASS jack,
regardless of the INPUT SELECT switch.
DC 9V IN jack
If you want to use an AC adapter to supply
power to the pitchblack+, you can use the
optional AC adapter (9V 600 milliamps).
Using any other AC adapter may cause
malfunctions.
DC 9V OUT jack
By using the included DC cable with the
optional AC adapter, you can supply power to
up to three effect pedals or other devices that
use 9V power ( ).
Make sure that the total current consump-
tion of the connected effect pedals does not
exceed 200 mA. You must also check the
polarity of the connected effect pedals.
Do not connect an AC adapter to the DC 9V
OUT jack. This may cause malfunctions.
If the pitchblack+ is operating on battery
power, power cannot be supplied from the
DC 9V OUT jack.