Filter
Top Products
22
OPERATION
The meaning of the menu is the same
with the DVD menu above.
GOTO FUNCTION
FOR DVD:
Press GOTO button, the screen will display
the following message:
Use the number keys to input the desired
Title, Chapter or Time, then press OK key
to confirm.
FOR VCD (WITH PBC OFF)/CD:
You can input the Track and Time then
press OK key to confirm.
ZOOM FUNCTION
Allows the picture to be increased in size.
Press ZOOM button on the remote control
to toggle among 2 scale, 3 scale and 4
scale, 1/2 scale,1/3 scale, 1/4 scale.
When the scale is 1/4 times, press ZOOM
button again to cancel the zoom function.
During Zoom mode, press / , /
buttons to move pictures up, down, left,
or right direction.
SPECIAL FUNCTIONS FOR DVD
Multi-subtitle Language Function
Press SUBT during playback. The
following information will be shown on
the screen.
: [1 CHINESE]
Each time the button is pressed, the
subtitle language changes in sequential
order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
Multi-audio Language Function
Press AUD during playback. The following
information will be shown on the screen.
: [3 ENGLISH 5.1CH]
Each time the button is pressed, the
audio soundtrack language changes on
sequential order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one
soundtrack language.
Multi-angle Function
Press ANG during playback. The
following information will be shown on
the screen.
Each time the button is pressed, the
angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only works for discs
having scenes recorded at different
angles.
Program Play
In program play mode, you can play the
track in your desired sequence.
To program play a disc, please follow
the next instructions.
For VCD and CD:
1) In PBC OFF mode. Press PROG
button on the remote control to enter
program edit interface.
2) Use
/ or / cursor buttons to
select the items you want to program.
The items you selected will become
highlight.
3) Input the sequence number you want
to program by numeric buttons (0-9)
on the remote control.
4) Use cursor buttons to select PLAY
character, and PROG will be
highlighted, press OK button on
remote control or ENT button on the
front panel to confirm. And the unit
will play the tracks you programmed.
5) If you want to clear the programe,
select CLEAR character and press
ZOOM 2 ZOOM 3 ZOOM 4 ZOOM 1/2
ZOOM OFF ZOOM 1/4 ZOOM 1/3
[ 1/4 ]
Prog-
1 [
]5[] 9[] 13[ ]
2 [
]6[] 10[ ] 14[ ]
3 [
]7[] 11[ ] 15[ ]
4 [
]8[] 12[ ] 16[ ]
Play Clear