Lenco Marine BT-125 Car Speaker User Manual


 
6
Note:
Whilst the blue Status LED indicator blinks (3 minutes) fast, the unit is searching mobile device
for pairing.
Whilst the blue Status LED indicator blinks slowly, it means that the Bluetooth
®
communication
disconnected or after the 1
st
three searching minutes. To establish the Bluetooth
®
connection,
implement the 3 approaches (A), (B) or (C) mentioned in above sections.
Energy Saving Note
In Bluetooth
®
mode, if the Bluetooth
®
communication link disconnected for around 30 minutes,
the unit will go into standby mode automatically.
Listening to an external audio source
1. Connect an audio cable with 3.5mm stereo plug from an auxiliary audio device to the AUX-IN
jack of the unit.
2. Press the POWER
button to turn on the unit.
3. To select auxiliary audio input, press the FUNC button and the green status LED indicator will
blink for around 5 seconds then lights steadily.
4. Turn on the external auxiliary audio device.
5. The volume can now be controlled through the unit.
Operate all other functions on the external device as usual.
Notes: (a) Press the POWER button to turn off the unit when you finish listening.
Don't forget to switch off the power of the external audio device as well.
(b) If there is without any music (signal) presented at the AUX-IN input jack for around 10
minutes, the unit will turn into standby mode automatically.
Charging smart phone/mobile device battery
The unit incorporated an USB port with DC 5V (1000mA Max.) output which provides a way for
you to charge mobile device’s battery.
You can connect a mobile device like Apple devices, smart phones or tablet to the USB
connector of the unit. Once the AC mains power is connected and it will charge the mobile device
battery.
3D Sound effect
This model integrated sonic emotion 3D sound technology which uses (WFS) wave field
synthesis to create the illusion of sounds all around. Any input even stereo can be used including
the iPhone/iPad/iPod Touch/Smart phone Bluetooth
®
streaming music or Aux-in music being in
stereo; by using WFS from sonic emotion, the 3D sound effect can create a virtual sound field
where you can enjoy the finest audio no matter where you are in the room from a single device.
Sonic emotion and Sonic Emotion 3D sound are registered trademarks of sonic emotion ag.
the