Filter
Top Products
80
206-4260
SPEAKER OUT
LINE OUT
PTC SERVICE
(SERVICE ONLY)
RJP
GAME CONTROL
/ MPI
L/MONO AUDIO R
COMPONENT IN / AV IN
ANTENNA /
CABLE IN
LAN
AUX LAN
OPTICAL
DIGITAL
AUDIO OUT
IN
1
USB IN 1
RESET
UPDATE
VIDEO/
Y
P
B
P
R
PC AUDIO
SERVICE
TV-LINK CFG
Reference: LY970H Rear and Side Jack Panels
COMPONENT IN / AV IN
Connect component output or composite
audio/video output from external device.
UPDATE
Restricted to software
updates.
RESET
Initiates a hardware reset
and turns the TV OFF.
SPEAKER OUT / LINE OUT
(3.5 mm jack) Connect external audio (xed
speaker, variable speaker, or xed line
level [amplier]) equipment. See Reference
section, “External Stereo Speaker
Specifications,” for further information.
SERVICE
Typically used for downloading
software updates, etc.
RJP
Connection for Remote Jack Pack (RJP)
Control cable.
HDMI IN 1
Connection for HDMI output
from external device.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
PTC SERVICE (SERVICE ONLY)
Restricted to service updates.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater systems. Note:
When the TV is OFF, this port is not enabled.
AUX LAN & LAN
Use for video IP and/or
network connections.
USB IN 1
Insert USB memory device for software updates,
cloning purposes, FTG Mode via CPU configuration,
picture/music entertainment, etc., as applicable.
Side Jack Panel
IN 3 (MHL)
USB IN 2
IN 2 (ARC)
USB IN 2
Insert USB memory device
for software updates, cloning
purposes, FTG Mode via CPU
configuration, picture/music
entertainment, etc., as applicable.
HDMI IN 2 & 3
Connection for HDMI output
from external device.
GAME CONTROL/MPI
When the TV/EBL is in Pass-through Mode, the
MPI function enables an external MPI control
device (i.e., VOD/PPV STB, etc.) to control the TV.
Game Control—EBL in SONIFI PPV Mode only.
TV-LINK CFG
(
3.5 mm jack) Use to connect PC to TV (EBL)
for local FTG Mode via EBL configuration.
Caution: Do NOT connect a standard Ethernet
cable to the RJP port, as this may damage the
TV and network equipment.