Filter
Top Products
12
Symptom
Cause
No power
The power cord is disconnected.
The power is on, but the DVD/CD
Receiver does not work.
No disc is inserted.
No Picture
The TV is not set to receive DVD signal output.
The vidio cable is not connected securely.
The connected TV power is turned off.
There is no sound or only a very low -
level sound is heard.
The equipment connected with the audio cable is not set to receive DVD signal output
The audio cables are not connected securely.
The Power of the equipment connected with the audio cable is turned off.
The audio connecting cable is damaged.
The disc is dirty.
No disc is inserted.
The Playback picture is poor.
An unplayable disc is inserted.
The disc is placed unside down.
The DVD/CD Receiver does not start
playback.
Loud hum or noise is heard.
The disc is not Placed within the guide.
The disc is dirty.
A menu is on the TV screen.
The Rating level is set.
The disc is dirty.
The speakers and components are connected poorly.
The DVD/CD Receiver is located too close to the TV.
The antenna is positioned or connected poorly.
Radio Stations cannot be tuned in.
The signal strength of the stations is too weak (when tuning in with automatic tuning).
No stations have been preset or preset stations have been cleared (when tuning by
scanning preset stations).
The Remote control does not work
properly
The remote control is not pointed at the remote sensor of the DVD/CD Receiver.
There is an obstacle in the path of the remote control and the DVD/CD Receiver.
The batteries in the remote control are flat.
Nothing is displayed on the front panel display.
The front panel display is too dim.
The remote control is too far from the DVD/CD Receiver.
ou can select an item by pressing Y
Displaying Disc Information on-screen
Displaying Disc Information -
more you can do