LG Electronics SH32SD-WZ Car Stereo System User Manual


 
9
Function Selection
You can select the different functions by
pressing the different function keys in the remote as
follows:
Band (for FM & AM), DVD/CD, AUX, USB)
Speaker System Connection
Connect the speaker cords to the speaker terminals.
To obtain the best possible surround sound, adjust
the speaker parameters (volume, distance, etc.).
Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and–
to –. If the cables are reversed, the sound will be
distorted and will lack base.
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid excessive
output on the speakers.
Antenna Connection
Connect the AM Loop aerial to the AM aerial
connector.
Connect the FM Wire aerial to the FM aerial
connector.
Notes:
To prevent noise pickup, keep the AM Loop aerial
away from the DVD/CD Receiver and other
components.
Be sure to fully extend the FM wire aerial.
After connecting the FM Wire aerial, keep it as
horizontal as possible.
Connect the supplied FM/AM antenna for listening to
the radio.
INPUT
AUX IN
L
R
FM Wire Antenna
(Supplied)
AM Loop Antenna
(Supplied)
Be careful of the following
Be careful to make sure children do not put their
hands or any objects into the *speaker duct.
*Speaker duct: A hall for plentiful bass sound
on speaker cabinet(enclosure). Use the rear
speaker at least 30 CM away from either TV
screen or PC monitor.
5.1
Assuming you are centered in the middle of your couch,
facing your TV display and center-channel speaker
at 0 degree, then your left and right main front speakers
should be within a 22 to 30 degree angle to each
side, viewed from your seat.
The main left and right surrounds should be to the
respective sides of the listening area, above ear level if
possible (ideally 2 feet or more) at an angle of 90
to 110 degrees from the front center.
Channel Speaker System
Configuration