Magnadyne M4100CD Car Stereo System User Manual


 
5
Radio Operation
Sound Controls
Adjusting the Volume, Bass Treble, Balance and
Fader
1. Press the button to select the desired audio
mode. The audio modes will be display in the dis-
play area in the following order: Volume, Bass,
Treble, Balance and Fader.
2. Press the or buttons to adjust the sound
of the audio mode selected: Volume, Bass,
Treble, Balance or Fader.
Initial Volume Level
To program the Initial Volume Level, adjust the
volume to the desired level, then press the
power button for more than 3 seconds. The
next time the unit is turned on, the volume will be
at this initial level.
SEL
VOL
VOL
Adjusting the Audio Beep
Press the button for more then 2 seconds to
turn beep On/Off. When the beep is on the
icon will be displayed.
Adjusting the Loud Feature
Press the LOUD button (18) to increase the bass
output, "LOUD" will then show in the display area.
Press the button again to release this function.
Mute
In Radio/Aux In mode, press the button (14)
mute audio level. Press the button again to
release this function.
MUTE
SEL
Listening to the Radio
1. Press the “BAND” button (17) to select a radio
band: FM1, FM2, AM or WX (weather band).
2. AM or FM Station Selection:
Automatic Seek Station Selection: Press the
or button (3) to automatically seek the
next strong station.
Scan Station Selection: Press the scan button
(5) to automatically scan through strong sta-
tions in the current radio band. The radio will
pause for 5 seconds at each strong station.
Each time the frequency flashes on the display.
Press the scan button again to hold the current
station.
Manual Station Selection: Press the or
button for more than 3 seconds to select man-
ual station selection, and "MAN" will appear in
the display. Use either button to manually seek
up and down the frequency scale.
Note: If either button is not pressed for several
seconds, the unit will return to Automatic Seek
Station Selection and "AUTO" will appear on the
display.
Weather Band Station Selection (WX):
Manual Station Selection: Press the or
button to manually seek stations.
Programming the Radio
You can program up to 12 FM radio stations and 6 AM
radio stations.
Manual Station Recall Programming
1.
Press the “BAND” button (17) to select a radio
band: FM1, FM2 or AM.
2. Select the desired station.
3. Press and hold one of the six station recall but-
tons (6-11), the button number and "CH" appears
in the display area. Release the button.
4. Repeat the procedure to memorize more stations
as desired.
Automatic Station Store
1.
Press the “BAND” button to select a radio band:
FM1, FM2 or AM.
2. Press the button (12) for more than 2 sec-
onds, the radio will then search the current fre-
quency and check the signal strength until the 6
strongest stations are stored into the correspond-
ing preset number button. When completed, it will
change to scan preset stations automatically.
Preset Scan
Press the button to scan the preset stations.
The radio will hold at that preset number for sev-
eral seconds, then will scan again. To stop scan-
ning when a desired station is reached press the
button again.
AS/PS
AS/PS
AS/PS
M4100CDUM.qxd 07/24/03 4:29 PM Page 5