Filter
Top Products
BASIC
CONNECTIONS
OPERATION
ADVANCED
CONNECTIONS
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
OPERATION
ENGLISH
8
OPERATION
TURNING THE POWER ON
1.
Press the POWER ON/STANDBY switch.
2.
Sound is output after the standby indicator goes off and the illumination lamp has blinked for about 7
seconds.
The sound output is delayed because of the activation of the muting circuit, which prevents noise from being output
until the amplifi er's circuitry operates stably after the power has been turned on.
(The illumination lamp is lit while the amplifi er is operating.)
Note:
Before turning the power on, turn down the volume controls on the connected components.
TURNING THE POWER OFF
1.
Press the POWER ON/STANDBY switch.
2.
The illumination lamp goes off, the standby indicator lights, and the amplifi er goes into standby mode.
Note:
Power is still supplied to some circuits even while the amplifi er is in standby mode.
Disconnect the power cable plug from the power outlet when you leave home for a prolonged period.
Make sure you can disconnect the plug from the power outlet at any time in order to prevent possible accidents.
8CH POWER AMPLIFIER MM8003
8CH POWER AMPLIFIER M M8003
POWER ON/STANDBY
POWE R ON/S TAND BY
STANDBY
STANDB Y
POWER ON/STANDBY
switch
Illumination lamp
Standby indicator