Filter
Top Products
BASIC
CONNECTIONS
OPERATION
ADVANCED
CONNECTIONS
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
OTHERS
ENGLISH
14
OTHERS
Rated power output (from 20 Hz to 20 kHz/THD = 0.08 % two
channels driven)
.........................................................140 W / ch 8 Ω
.........................................................170 W / ch 6 Ω
Output bandwidth (8-Ω load, 0.09%)
...........................................................5 Hz – 40 kHz
Frequency response (1 W, 8 Ω)
...........................................8 Hz – 100 kHz (± 3 dB)
Damping factor .................................................................. 100
Input sensitivity/impedance
................................1.2 V/ 22 k Ω (UNBALANCED)
......................................2.4 V/30 k Ω (BALANCED)
Signal-to-noise ratio (IHF-A) .........................................105 dB
Voltage amplifi cation level ..............................................29 dB
Supply voltage ..................................................AC120V 60 Hz
Power consumption .......................................................800 W
Standby power ................................................................0.4 W
Weight ......................................................................17.9 kg
Accessories
Power cable ................................................................... 1
Remote control cable ..................................................... 1
Warranty card
USA ........................................................................ 1
Canada .................................................................. 1
Operating instructions (this document) .......................... 1
7-5/16 ins.
(184.5 mm)
9/16 ins.
(14 mm)
6-3/4 ins.
(170.5 mm)
17-3/8 ins. (440 mm)
1/8 ins.
(2 mm)
15-1/8 ins. (384 mm)
7/8 ins.
(22 mm)
14-3/16 ins. (360 mm)
OUTSIDE DIMENSIONS
The section describes the care and maintenance
tasks that must be performed to optimize the
operation of your Marantz equipment.
CLEANING OF EQUIPMENT EXTERNAL SURFACES
The exterior fi nish of your unit will last indefi nitely with
proper care and cleaning, Never use scouring pads,
steel wool, scourging powders or harsh chemical
agents (e.g., lye solution), alcohol, thinner, benzine,
insecticide or other volatile substances as these wil
mar the fi nish of the equipment. Likewise, never
use cloths containing chemical substances. If the
equipment get dirty, wipe the external surfaces with
a soft, lint-free cloth.
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water, in a ratio of
one part detergent to six parts water.
• dip a soft, lint free in the solution and wring the it is
damp.
• wipe the equipment with the damp cloth.
• dry the equipment by wiping it with a dry cloth.
REPAIRS
Only the most competent and qualified service
technicians should be allowed to service the
factory-trained warranty station personnel have
the knowledge and special facilities needed for
repair and calibration of this precision equipment.
After the warranty period has expired, repairs will
be performed for a charge if the equipment can be
returned to normal operation.
In the event of diffi culty, refer to your dealer or write
directly to the nearest location to you that is listed on
the Marantz Authorized Service Station list. If writing,
please include the model and serial number of the
equipment together with a full description of what you
think is abnormal about the equipment’s behaviour.
SPECIFICATIONS