Marshall electronic OR-841-HDSDI Car Video System User Manual


  Open as PDF
of 24
 
■ TimeCode
Selects among to following options: OFF / LTC / VITC1 / VITC2. In the most cases, the value of LTC and
VITC1 will be identical to each other.
■ Power Save
• When enabled, the monitor will go to sleep after a predened time has passed when loss of picture occurs.
• When a valid video format is detected, the monitor will wake up from the sleep state.
• Pressing any front panel keys will wake up the monitor.
• In the sleep state, all lights (including the backlight and front key indicators) are turned off.
• Any change in parallel remote status will wake up the monitor.
• Tally status is not affected by sleep mode.
■ Key Lock
When it is locked, user cannot use front panel keys except for accessing the menu.
■ Reset to MFG Default
• This will Restore all conguration values and functions to the factory preset state.
• This will not change Model Name, Serial Number, or White Balance Data.
• Requires Conrm action by selecting Conrm again.
(Select Reset -> RotoMenu control -> Select Conrm -> Press RotoMenu control)
• Resetting default will not effect backed up data.
■ Backup User Conguration
• This command backs up all user information to secondary EEPROM (User settings)
• Requires Conrm action by selecting Conrm again.
(Select Backup -> Press RotoMenu control -> Select Conrm -> Press RotoMenu control)
■ Restore User Conguration
• This will Restore all conguration values and functions to the factory preset state.
• This will not change Model Name, Serial Number, or White Balance Data.
• Requires Conrm action by selecting Conrm again. (Select Reset -> Press the RotoMenu control ->
Select Conrm -> Press Enter the ROTO-Menu control)
• Resetting default will not effect backed up data.
■ Backup User Conguration
• This command backs up all user information to secondary EEPROM (User settings)
• Requires Conrm action by selecting Conrm again. (Select Backup -> Press the RotoMenu control ->
Select Conrm -> Press Enter the RotoMenu control)
21
 previous next