Marshall electronic V-R65P-HD Car Video System User Manual


  Open as PDF
of 4
 
V-R65P-HD Users Guide
Marshall Electronics
5
Electrical Specifi cations
Display (Viewing Area) 6.5” (5.67”H × 3.10”V) (144.0mm x 78.24mm)
Viewing Angles 130°H x 120°V
Resolution (RGB Dots) 800H x RGBx480V (1.2 million pixels)
Contrast Ratio 400:1
Dot Pitch 0.163 mm
Pixel Response <25ms
Brightness 400 cd/m²
System NTSC/PAL auto recognition for composite video
Inputs
Composite with loop (BNC)
HDSDI/SDI with re-clocked output (BNC)
Multiple Analog Format HD-15
6
Mechanical Specifi cation
Dimensions 7.25”W x 4.25”H x 2.5”D
Approx. Weight 3 lbs
Power Consumption 12VDC, 5.0 Amps max - UL Class 2 (supply included)
Display Viewing Area 6.5” (5.67”H x 3.10”V) (144.0mm x 78.24mm)
7
Faceplate Cleaning
When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean
micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are too coarse and will scratch the
surface of the Plexiglas faceplate. Paper towels may also leave streaks on the surface.
Antistatic and fingerprint resistant Plexiglas cleaning agents are recommended.
V-R65P-HD shown with side mount confi guration of V-R65-BA adaptor
and IDX-E50S battery installed
V-R65P-HD shown with V-LCD4-MT camera hot shoe mount attached plus rear mount
confi guration of V-R65-BA adaptor and IDX-E50S battery
IDX-E50S
V-R65-BA
V-LCD4-MT
IDX-E50S
V-R65-BA
V-R65P-HD shown with V-H700P hood attached plus side mount confi guration of
V-R65-BA adaptor and IDX-E50S battery
 previous