Filter
Top Products
99-8225G DASH DISASSEMBLY
Toyota Venza 2009-2010
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Unclip and remove the trim panel to
the right of the shifter. (
Figure A)
2
Remove (1) Phillips screw from the
bottom of the climate control then
unclip and remove the climate
control.
(Figure B)
3
Remove (4)10 MM bolts securing the
radio. Note: You will need a univer-
sal swivel head socket adapter to
get to the bottom left bolt.
(Figure C)
4
Remove (4) Phillips screws securing
the factory radio to the a/c vent
panel. (
Figure D)
5
A
B
C
REAR VIEW - RADIO AND A/C VENT PANEL
RADIO
D
Continue to kit assembly.