Filter
Top Products
31
Kit Assembly 99-2001, AW-200GM
All vehicles – DIN head unit provisions
(Figure A)
(Figure B)
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
Note:When installing a DIN head unit
you will need to cut and remove the
shaft supports in the radio housing.
(Figure A)
2. Slide DIN cage into the Radio Housing
and secure by bending metal locking
tabs outward. (Figure B)
3. Slide radio into DIN cage. (Figure B)
4. Reassemble dash in reverse order
of disassembly.