Filter
Top Products
32
Kit Assembly 99-2001, AW-200GM
All vehicles – Shaft head unit provisions
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1. Slide the aftermarket head unit into the
kit from the back and secure with the
shaft nuts provided with the new
head unit.
Note: If an equalizer will be included
slide the unit into the back of the
radio housing and secure. If an
equalizer will NOT be included,snap
the equalizer dummy plate into the
opening in the radio housing
4. Reassemble dash in reverse order
of disassembly.