Filter
Top Products
Titan™ Mobile User’s Guide
Busy Scan
Busy scan is available when your dealer has programmed
Normal or Modify Scan Selection. Use the menu function to
select SCN scan mode.
The default user selection is PRI scan mode.
Press and release SCAN to activate Busy scan. All channels in
your scan list will be checked for activity, with no preference
given to any channel. While scanning in busy scan mode, the
radio will display “---“ and the SCAN icon. If activity is detected
on a channel, the radio will pause scan and display that channel.
While the radio is paused on a channel it may be deleted from
the scan list by briefly pressing the A/D button. This is the
nuisance channel delete function. To resume scanning at the
next channel in the scan list, without deleting the channel, rotate
the channel/menu knob clockwise.
Public Safety Scan
Public Safety scan is available when your dealer has
programmed PS Scan Selection.
No user scan mode selection is possible in Public Safety scan mode.
The user selection is fixed at PRI scan mode.
If enabled in programming, you may assign a second priority
channel before starting scan. Select the desired second priority
channel using the channel selector, then press and hold the
SCAN button for two seconds. The channel display will flash
when a second priority channel is displayed.
Press and release SCAN to activate Public Safety scan. The
channel selected when scan is started will be assigned as the
first priority channel. The priority channel(s) will be checked more
often than the other channels in the scan list. While scanning in
Public Safety scan mode, the radio will display the first priority
channel and a flashing PRI icon. While the radio is scanning, the
channel knob may be rotated to select and display a new first
18 © 2005, Midland Radio Corporation