Filter
Top Products
Titan™ Mobile User’s Guide
priority channel. This is the primary difference between Public
Safety scan and Priority scan.
If activity is detected on a channel, the radio will pause scan and
display that channel. While stopped on a non-priority channel,
the radio will continue to check for activity on the priority
channel(s). This is called priority channel lookback, and the
receive audio from the non-priority channel will be briefly
interrupted while priority lookback occurs. While the radio is
stopped on a non-priority channel it may be deleted from the
scan list by briefly pressing the A/D button. This is the nuisance
channel delete function. The priority channel(s) can not be
deleted from the scan list. To resume scanning at the next
channel in the scan list, without deleting the channel, rotate the
channel/menu knob clockwise.
Priority Monitor Mode (Dual watch)
Priority Monitor mode is available when your dealer has
programmed Second Scan Selection. Use the menu function to
select PRI scan mode.
The default user selection is PRI scan mode. User selections of SCN
(Busy scan) and P/S (Priority scan) are also possible when your dealer
has programmed Second Scan Selection.
If enabled in programming, you may assign a second priority
channel before initiating priority monitoring. Select the desired
second priority channel using the channel selector, then press
and hold the SCAN button for two seconds. The channel display
will flash when a second priority channel is displayed.
Press and release SCAN to activate Priority Monitor mode. The
channel selected when priority monitoring is started will be
assigned as the first priority channel. Then use the
channel/menu knob to select a channel of operation, while
continuing to monitor the priority channel(s) for activity. While in
Priority Monitor mode, the radio will normally display the
operating channel and the PRI icon.
© 2005, Midland Radio Corporation 19