Filter
Top Products
5. NetCommand IR Control (265 Series) 65
For assistance call 1(800) 332-2119
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Enter (digits)
When
ENTER
is for channel changes, i.e., the origi-
nal remote control has a separate
ENTER
key for
this function):
Learn the
ENTER
key for channel selection in
the NetCommand Enter (digits) learning posi-
tion. Use this learning position only if the original
remote control has separate keys for Enter in
menus and Enter for channel selection.
Press digit key(s) and then press
ENTER
.
NetCommand will send the Enter signal for
channel selection.
Cancel CANCEL as the Cancel or Exit Function
“Learn” the Cancel or Exit function in the
NetCommand Cancel learning position
Press 1.
MENU
or
GUIDE
to display the menu or
guide.
Press 2.
CANCEL
and NetCommand will send
the Cancel or Exit signal.
—
(separator)
The symbol “—” can serve as the separator
between a digital channel’s main and sub-channel
digits, e.g., digital channel 12-1 (main channel is
12, sub-channel is 1).
“Learn” the channel separator function in the
NetCommand – (separator) learning position.
Press digit key(s) and press
CANCEL
.
NetCommand will send the channel-separator
signal.
Operating NetCommand-Controlled Devices, continued
Downloaded From TV-Manual.com Manuals