Mitsubishi Electronics MDT3215 Car Video System User Manual


 
1-34
English-32
Specifications
Product Specifications Analog Input Digital Input
LCD Module Diagonal: 32" / 80.0cm
Pixel Pitch: 0.511mm
Resolution: 1366 x 768 dots
Color: Over 16 million colors (depending on video card used)
Brightness: 500cd/m
2
(Typ.)
Contrast Ratio: 600:1
Response time: 20ms (Tr+Tf)
Viewing Angle: Up 88°/ Down 88°/ Left 88°/ Right 88° (typ) @ CR>10
Design View Distance: 875 mm/34.4 inches
Frequency Horizontal: 15.625/15.734kHz, 31.5kHz - 91.1kHz 31.5kHz - 91.1kHz
Vertical: 50.0/58.0 - 85.0 Hz 50.0/58.0 - 85.0 Hz
Pixel Clock 25.0MHz - 162.0MHz 25.0MHz - 162.0MHz
Viewable Size 392.3 x 697.7 mm/15.4 x 27.5 inches
Input Signal
PC-Input: Video: Analog RGB Video 0.7V p-p TMDS
Input Impedance 75 ohm
Composite sync on Green Video: 0.3Vp-p Neg. (video 0.7Vp-p Pos.)
Sync: Separate HV sync: TTL level (Pos./ Neg.)
Input Impedance 2.2K ohm (RGB3: 2.2k ohm/75 ohm selectable)
Input-terminal: BNC (R,G,B,H,V) 15pin Mini D-sub DVI-D (Digital)
VIDEO Input: Composite 1.0V p-p Input Impedance 75 ohm BNC and RCA-INPUT
Y/C Y:0.7V p-p C:0.283V p-p Input Impedance 75 ohm S-TERMINAL-INPUT
Component 1.0/0.7V p-p Input Impedance 75 ohm BNC-INPUT
AUDIO Input: RCA PIN-JACK L/R INPUT, STEREO Mini Jack INPUT
RS-232C: In: 9 Pin Mini D-sub
Output Signal
PC-Output: Video: Analog RGB Video: 0.7V p-p with 75 ohm terminated
Sync: Separate HV sync: TTL level (Posi / Nega) with 2.2k ohm terminated
Output-terminal: Mini D-sub 15Pin
VIDEO Output: BNC 1 Output, Composite 1.0V p-p with 75 ohm terminated
AUDIO Output: RCA PIN-JACK L/R: 1 Output, 0.15Vrms with 1k ohm terminated
Speaker Output: External Speaker Jack 7W + 7W
Resolutions Supported 640 x 480 at 60Hz to 85Hz
800 x 600 at 50Hz, 60Hz to 85Hz
1024 x 768 at 50Hz, 60Hz to 85Hz
1280 x 768 at 50Hz, 60Hz to 85Hz
1360 x 768 at 50Hz, 60Hz* to 85Hz
1280 x 1024 at 60Hz to 85Hz
1600 x 1200 at 60Hz....................................................... Maximum Resolution
* Recommended Resolution
NTSC/PAL/SECAM/4.43NTSC/PAL60 Component: 480i, 480p, 720p, 1080i
Power Supply 1.4 - 0.6A @ 100-240VAC, 50/60Hz
Power Consumption Max.140W
Power save: Less than 4W (Power button OFF/Main power switch ON)
Operational Temperature: 5 - 40°C/41 - 104°F
Environment Humidity: 20 - 80% (without condensation)
Storage Temperature: -20 - 60°C/-4 - 140°F
Environment Humidity: 10 - 90% (without condensation)/ 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension Net: 789 (W) x 479 (H) x 140 (D) mm/31.1 (W) x 18.9 (H) x 5.5 (D) inches (without Stand)
789 (W) x 510.3 (H) x 200 (D) mm/31.1 (W) x 20.1 (H) x 7.9 (D) inches (with Stand)
Gross: 944 (W) x 652 (H) x 312 (D) mm/37.2 (W) x 25.7 (H) x 12.3 (D) inches
Weight Net: 33.5 lbs/15.2 kg (without Stand)
36.2 lbs/16.4 kg (with Stand)
Gross: 49.6 lbs/22.5 kg
VESA compatible arm 3 x 200mm x 200mm (8 Holes)
mounting interface 2 x 200 mm x 200 mm (6 Holes)
Complied Regulatory and UL60950-1/CSA C22.2 No.60950-1/ TUV-GS/EN60950-1
Guidelines FCC-B/DOC-B/EN55022-A/EN55024/EN61000-3-2/EN61000-3-3/CE
Power Management VESA DPM
Plug & Play VESA DDC2B, DDC/CI
Accessories User’s manual, Power Cord x2, Video Signal Cable, Remote Control, AA Battery x 2,
Clamper x 3, Screw x 4, CD-ROM, Ferrite Core x 2, Stand for the Independence x 2,
Curled head Screw for stand x 2, Band x 2, Speaker plug x 1set, Main power switch cover
NOTE: Technical specifications are subject to change without notice.
Downloaded From TV-Manual.com Manuals