MTX Audio AW52 Car Speaker User Manual


  Open as PDF
of 4
 
Ceiling Ht: 15’ Spkr Spacing: 25’ Max SPL @ 30W (Listener@3.5’) 94dB
Ceiling Ht: 16’ Spkr Spacing: 30.5’ Max SPL @ 30W (Listener@3.5’) 93dB
Ceiling Ht: 17’ Spkr Spacing: 33’ Max SPL @ 30W (Listener@3.5’) 93dB
Ceiling Ht: 18’ Spkr Spacing: 35.5’ Max SPL @ 30W (Listener@3.5’) 92dB
Ceiling Ht: 19’ Spkr Spacing: 38’ Max SPL @ 30W (Listener@3.5’) 92dB
Ceiling Ht: 20’ Spkr Spacing: 40.5’ Max SPL @ 30W (Listener@3.5’) 91dB
AW82=100
o
nominal coverage (50
o
off axis) at 2 kHz
Ceiling Ht: 8’ Spkr Spacing: 7.5’ Max SPL @ 30W (Listener@3.5’) 107dB
Ceiling Ht: 9’ Spkr Spacing: 9.5 Max SPL @ 30W (Listener@3.5’) 106dB
Ceiling Ht: 10’ Spkr Spacing: 11’ Max SPL @ 30W (Listener@3.5’) 104dB
Ceiling Ht: 11’ Spkr Spacing: 12.5’ Max SPL @ 30W (Listener@3.5’) 103dB
Ceiling Ht: 12’ Spkr Spacing: 14.5’ Max SPL @ 30W (Listener@3.5’) 102dB
Ceiling Ht: 13’ Spkr Spacing: 16’ Max SPL @ 30W (Listener@3.5’) 101dB
Ceiling Ht: 14’ Spkr Spacing: 17.5’ Max SPL @ 30W (Listener@3.5’) 100dB
Ceiling Ht: 15’ Spkr Spacing: 19.5’ Max SPL @ 30W (Listener@3.5’) 99dB
Ceiling Ht: 16’ Spkr Spacing: 21’ Max SPL @ 30W (Listener@3.5’) 98dB
Ceiling Ht: 17’ Spkr Spacing: 22.5’ Max SPL @ 30W (Listener@3.5’) 98dB
Ceiling Ht: 18’ Spkr Spacing: 24.5’ Max SPL @ 30W (Listener@3.5’) 97dB
Ceiling Ht: 19’ Spkr Spacing: 26’ Max SPL @ 30W (Listener@3.5’) 97dB
Ceiling Ht: 20’ Spkr Spacing: 28’ Max SPL @ 30W (Listener@3.5’) 96dB
Ceiling Ht: 25’ Spkr Spacing: 36’ Max SPL @ 30W (Listener@3.5’) 94dB
Ceiling Ht: 30’ Spkr Spacing: 44.5’ Max SPL @ 30W (Listener@3.5’) 92dB
Installation
Fixed Install:
The MTX All Weather Speaker systems include a versatile yet simple U-bracket
designed to provide easy vertical or horizontal installation on just about any surface.
The speaker may be installed using screws or bolts placed through the “L” shaped
holes in the mounting bracket. The center 5/8”-27 hole allows wires to exit through the
bracket when wall mounting, for a neat installation. The unused inserts on the bottom
of the cabinet (AW82) or rear of the cabinet (AW52) may be used with standard 1/4”-20
forged eyebolt and an approved safety cable (wire rope sling) where redundant sup-
port is required for seismic considerations. These parts are available through many
sources including Grainger Corporation. (www.Grainger.com).
Size 21, 1/4” X 1” Forged Eyebolt- Grainger Part Number: 2G692
Galvanized Steel Cable Spool, 1/8”- Grainger Part Number: 4KH26
Sleeve N Thimble
TM
Kit for 1/8” Cable, -Grainger Part Number: 4KH28
Swage It Tool for 1/16”, 3/32”, and 1/8”- Cable Size- Grainger Part Number: 4KH08
The mounting knobs included with the speaker product may be easily interchanged
with standard, 1/4”-20 vandal proof hardware. Grainger Corporation is also a good
source for torx head, spanner head or one-way security bolts. (www.Grainger.com)
TORX Drive Button Head 1/4” Machine Screw, Tamperproof, 1/2” Length- Grainger Part
Number: 5JD16
One-Way Round Head 1/4” Machine Screw, Tamperproof, 1/2” Length- Grainger Part
Number: 5JC82
Spanner Flat Head 1/4” Machine Screw, Tamperproof, 1/2” Length- Grainger Part Number:
5JC94
When you have an installation challenge that the U-bracket will not accommodate,
we suggest you contact our friends at OMNIMOUNT systems (www.omnimountsys-
Specifications:
AW52
Frequency Response (± 3 dB) 85 Hz to 20 kHz
Usable Low Frequency Limit 65 Hz
(10dB Down Point)
Power Handling (RMS/Peak) 100W / 150W
Sensitivity (1W/1M) 90dB
Nominal Coverage Angle 90°H X. 90°V
Transducer Complement
High Frequency Dome Tweeter
Low Frequency 5 1/4” Hycone Treated Woofer
Crossover Frequency 4.5 kHz
Crossover Slope 12 dB/ Octave
Impedance 8 ohm
Input Connections: (1) 1/4” Phone Jack and (1) 5-way Touch Proof
Binding Post
Driver Protection (High Frequency) PTC Protected
Materials UV-Resistant Talc Impregnated Polypropylene
Injection Molded Weatherproof Enclosure (White
Finish)
Perforated Powder Coated Aluminum Grille
matches enclosure color
Weight (Less Bracket) 7.05lbs. (3.2kg)
Dimensions (Less Bracket) 10 3/16” (25.8cm)H X 6 7/8” (17.5cm)W X 5 7/8”
(14.85cm)D
AW82
Frequency Response (± 3 dB) 65 Hz to 20 kHz
Usable Low Frequency Limit 51 Hz
(10dB Down Point)
Power Handling (RMS/Peak) 150W / 225W
Sensitivity (1W/1M) 92dB
Nominal Coverage Angle 65°H X. 65°V
Transducer Complement
High Frequency 1” Exit Compression Driver
Low Frequency 8” Hycone Treated Woofer
Crossover Frequency 2.2 kHz
Crossover Slope 12dB/ Octave
Impedance 8 ohm
Input Connections (1) 1/4” Phone Jack and (1) 5-way Touch Proof
Binding Post
Driver Protection (High Frequency) PTC Protected
Materials UV-Resistant Talc Impregnated Polypropylene
Injection Molded Weatherproof Enclosure. (White
Finish)
Perforated Powder Coated Aluminum Grille
matches enclosure color
Weight (Less Bracket) 16.32lbs. (7.4kg)
Dimensions (Less Bracket) 16 1/2” (41.9cm)H X 9 1/16” (23.0cm)W X
8 7/16” (21.49cm) D
 previous