Filter
Top Products
3.2.2.4 OSD-Menu - Options 2
Fig. 19: OSD-Menu - Options 2
Function Description RGB DVI
DPMS
Display power management system
If DPMS is active, the monitor shuts down when there no sync
signals
Setting range: off; on
X X
Source scan
Automatic scan for input sources; scans all input interfaces for
valid input signal.
Setting range: off; on
X X
Source icon
Enable or disable display of source icon.
Changes to any of the following cause this icon to appear and
display the actual signal source information:
Signal source (e.g. RGB1 analog)
Mode, resolution of input signal source, H-
and V-frequency.
X X
SCI2-mode
Selection of communication protocol of serial interface RS232-2
and RS422 (see chapter 4 page 42).
Setting range: Standard; Sony DDM
X X
SCI2-signal type
Selection of active serial interface. Only one of the two interfaces
can be active.
Setting range: RS232; RS422
X X
(X): available for this input signal
3 Operation and Adjustment 33