Filter
Top Products
3.2.2.5 OSD-Menu - Options 3
Fig. 20: OSD-Menu - Options 3
Function Description RGB DVI
RGB-noise
suppression
This function suppresses interference at the sync signal lines
to avoid a new auto adjustment during short interference.
Setting range: off; on
X X
Lock RGB-Timing 1
The current video timing will be stored and processed with
higher tolerances in H- and V- frequencies. These timings
will be used despite fluctuations in H- and V- frequency
resulting from a noisy video signal, which might otherwise be
misinterpreted, resulting in incorrect centering or pixel
resolution.
X X
Unlock RGB-Timing 1
Settings for video timing 1 get released. Auto adjustment is
enabled again.
X X
Lock RGB-Timing 2
See lock RGB-Timing 1
X X
Unlock RGB-Timing 2
See unlock RGB-Timing 1
X X
RGB-Timing 1
Shows resolution and refresh rate of locked timing 1; Only
available if timing 1 is locked.
X X
RGB-Timing 2
Shows resolution and refresh rate of locked timing 2; Only
available if timing 2 is locked.
X X
Auto position
ON: the position will be automatic centered
OFF: the position depends on the auto adjustment of the
signal
X
(X): available for this input signal
3 Operation and Adjustment 35