Filter
Top Products
38
Chapter 6 Reference
6-4. Displaying Monitor Information
●
Displaying monitor information by pressing
This indicator shows the power saving ratio, power reduction and CO
2
reduction as a result of the
brightness of the monitor.
(Example)
NOTE
Power reduction: the backlight’s reduction of electricity consumption as a result of the adjusted brightness value
CO
2
reduction: converted from the “Power reduction” value, this is an estimate of the quantity of CO
2
emissions
reduced when using the monitor for 1 hour.
* The numeric value is a result of a calculation based on a default value (0.000555 t -CO
2
/kWh) determined by
a ministerial ordinance (2006, Ministry of Economy, Trade and Industry, Ministry of Environment, civil code
article 3) and may differ depending on country and year.
•
•
●
Displaying signal information [Signal Info]
This function displays the information about the current input signals displayed.
Choose <Tools> from the Adjustment menu, and press .
Choose <Signal Info> from the <Tools> menu, and press .
The Signal Info screen appears.
(Example)
●
Displaying monitor information [Monitor Info]
This function displays the information about the monitor.
Choose <Tools> from the Adjustment menu, and press .
Choose <Monitor Info> from the <Tools> menu, and press .
The Monitor Info screen appears.
(Example)
Attention
The usage time is not always “0” due to factory inspection when you purchase the monitor.•
1.
2.
1.
2.