Filter
Top Products
10
OSD Function Description
Controls –continued
Brightness To increase or decrease the brightness.
Contrast To increase or decrease the contrast.
Auto Contrast Press “+” key to start auto contrast.
Color Temperature Press “-” or “+” to select 5000, 6500, 7500, 9300 and USER.
Only when selecting USER, you can make adjustments to the
R/G/B content.
Horizontal Size To increase or decrease the size of image.
Fine To increase or decrease the noise of the image.
Left/Right To move the screen toward left or right.
Up/Down To move the screen upward or downward.
Auto-Adjust Press “+” to turn on this function. The Auto-Adjust will
automatically adjust V-Position, H-Position, Clock, and
Clock-Phase, the whole process takes about 5 seconds.
Flesh Tone To adjust flesh tone of color.
Hue To adjust hue of color.
Saturation To adjust saturation of color.
Language Select among English, French, Italian, German and Spanish.
Factory Preset To return the monitor to its default settings.
OSD Time Out To adjust the period of OSD auto turn-off time.
OSD Left/Right To move the OSD position horizontally on the screen.
When the “+” key is pressed, the OSD control menu will move
to the right side of the screen. Likewise when the “–” key is
pressed, the OSD control menu will move to the left side.
OSD Up/Down To move the OSD position vertically on the screen.
When the “+” key is pressed, the OSD control menu will move
to the up side of the screen. Likewise when the
“–” key is pressed, the OSD control menu will move to the
lower side.
Information Indicates the current resolution and V-Frequency.
ASLCDmanual022803.p65 2/28/03, 9:44 AM10